These new generation LED High Bay fixtures not only save power significantly but also greatly enhance the visual appeal of the ambience. Long life, lower maintenance, environment-friendly. LED lighting is a boon absolutely.
It is often said that a factory or plant shall not only focus on producing goods efficiently, but also look at the infrastructure that enables such production to be efficient too. Lighting in a factory or a plant is one such key element that can not only be made efficient in terms of its performance but go a long way in other aspects as well, viz. energy conservation, environment sustainability, lower maintenance, cost optimization, etc. A properly illuminated environment also positively impacts employee performance and their productivity, which in turn, supports the operational objectives.
The conventional method
Traditionally, any machine shop, assembly section or many areas in a factory or an engineering plant use the conventional lighting source ie HID (high intensity discharge) lamps, Metal Halide, High Pressure Mercury Vapour or Sodium Vapour lamps (HPSV or HPMV as they are called) for lighting applications. These sources, no doubt, have a high luminance levels and lower initial costs prima facie, but have various constraints too .. viz. limited life, high operational costs, lower CRIs, fixed or narrow color temperature spectrum, dimmability, color shifts, lumen depreciation, start-up delay, and so on.. While these light sources have indeed been serving the basic purpose of industrial lighting, the technology has undergone a drastic shift with the advent of LED coming in the lighting applications domain.
The LED advantage
LEDs have altered the scenario of lighting to such an extent that it has not only matched the illuminance levels that the conventional sources are known for, but has gone several notches higher by offering significant reduction in energy consumption, very long life, lowest maintenance, choice of color temperatures, high CRI – besides other points like sleeker housing, lesser heat generation, etc.
Talking specially about LED High Bay fixtures, the conventional HID lamp fixtures like 250W or 400W are replaced by 90W or 127W LED High Bay fixtures, that drastically bring down the energy consumption, and thereby helping the industries or plants to save on power and also save money. Before we see the technicals and costs, the following images show how the entire enviornment is brilliantly transformed visually.
The table can be easily understood how LED high-bay saves extraordinarily on the power consumed. Extrapolating this will prove that even the pay-back period on the initial investment is amazingly short.
The table can be easily understood how LED high-bay saves extraordinarily on the power consumed. Extrapolating this will prove that even the pay-back period on the initial investment is amazingly short.
The RLT advantage
RLT, the pioneers in LED technology and applications, can extend a remarkable support through their unique concepts.
SERELEC / LASO – which are way beyond just offering products.. A synopsis on these concepts :
SERELEC:
Survey, Evaluation and Recommendation for Efficient Lighting and Energy Conservation: By this, RLT takes up a comprehensive survey of your factory or any area which requires efficient and energy-saving lighting, and provides you with a scientific and proper recommendation of lighting.
LASO:
Lighting as a Service Option: Once the survey and recommendation is done, we take one step further. Subject to our recommendations being considered, we can work out various finance option modules that suit you the best. This service is subject to a few specific parameters, though.
Talk to RLT. And see how a shift in the lighting of your industrial applications can make a difference !!
No comments:
Post a Comment